Epson Pro Cinema LS9000: One Minute Review

The Epson Pro Cinema LS9000 is the latest—and least expensive—member of Epson’s LS series of projectors. Priced at $3,999 / £2,999 / AU$7,299, this entry-level dedicated home theater projector is notably cheaper than comparable options from JVC and Sony, yet it still comes packed with an impressive array of features and performance to match.

The Pro Cinema LS9000 follows in the footsteps of the Epson LS12000 model, which currently tops TechRadar’s Best Projectors list. It aims to continue this legacy by employing the same 15-element glass VRX lens structure, laser light engine, and 3LCD technology as the LS12000.

Similar to its step-up sibling, the LS12000, the LS9000 supports 4K at 120Hz signals, boasts relatively low input lag for gaming, and is compatible with the HDR10+ high dynamic range format. Motorized lens shift, zoom, and focus make setup adjustments straightforward, and out of the box—in Natural picture mode—it delivers accurate colors and a crisp image.

Despite these strengths, some missing features highlight its entry-level position. The most notable is the lack of dynamic tone mapping—a feature beginning to appear even in some less expensive home theater models. With a rated 2,200 lumens brightness (both white and color), the LS9000 is best suited for rooms with good ambient light control rather than bright, multi-purpose living spaces.

Still, the Epson Pro Cinema LS9000 offers incredible performance for its price point. It’s a solid, easy-to-set-up projector that also offers plenty of image customization options, appealing to new or budget-conscious home projection enthusiasts alike.

Release Date and Price

The Epson Pro Cinema LS9000 was unveiled in July 2025 at the Audio Advice Live show in Raleigh, North Carolina. As the least expensive among Epson’s Pro Cinema laser projectors, it costs $3,999 / £2,999 / AU$7,299.

For comparison, the Home Cinema LS11000 retails for $4,499 (up from $3,999 at release), and the LS12000 is priced at $5,999 (up from $4,999 at release).

Epson Pro Cinema LS9000 Review: Specs

• Motorized zoom, focus, and lens shift
• 4K 120Hz support
• Motorized lens cover
• Two HDMI 2.1 inputs with 4K 120Hz & eARC support
• HDR10, HLG, and HDR10+ support
• ±24% horizontal and ±96% vertical lens shift
• Throw ratio: 1.35 – 2.84:1
• Brightness: 2,200 lumens (white and color, rated)

Design & Features

The LS9000 shares a similar design with its premium siblings—the Pro Cinema LS12000 and Home Cinema LS11000—as well as the high-lumen Epson QB1000 released in late 2024. All connections are located on the back panel, alongside touch controls for convenience if the remote is misplaced.

Internally, it uses the same VRX lens with a 15-element glass structure and Epson’s 4K 3LCD architecture with three 0.74-inch LCD panels. Like other Epson projectors, it employs pixel-shifting technology to achieve a 4K resolution from 1080p chips.

While some enthusiasts may criticize this approach as not being “True 4K” compared to using native 4K chips, the pixel-shifted 4K image from the LS9000 is remarkably detailed and crisp, especially from a normal viewing distance. The chip also supports a maximum refresh rate of 120Hz.

The laser light source emits 2,200 lumens of both color and white brightness (IDMS and ISO rated) with an expected life of up to 20,000 hours across all modes. This brightness is slightly lower than the LS11000 and LS12000 models, which deliver 2,500 and 2,700 lumens respectively, explaining part of the price difference.

The projector uses a blue laser diode array that shines through a fixed yellow phosphor to create white light — a system first introduced with the LS12000—instead of a phosphor wheel. This design also allows it to run silently.

The LS9000’s brightness suits dark or light-controlled rooms more than fully bright living spaces, but it still delivers enough brightness for comfortable daytime viewing (more on this below).

Lens adjustments are generous, with ±24% horizontal and ±96% vertical powered lens shift, motorized zoom with a 1:1.2 ratio, and motorized focus—all controllable via the remote, making setup a breeze. The throw ratio ranges from 1.35 to 2.84:1.

Vertical and horizontal keystone correction (±30 degrees) is available, although with extensive lens shift, keystone adjustments should ideally be avoided to prevent picture distortion.

The LS9000 supports an anamorphic lens kit (sold separately) along with third-party options. Users can save image presets and lens positions for different aspect ratios thanks to a memory feature. Additionally, the lens is protected by a motorized cover that opens and closes with the projector’s power cycle.

The projector supports HDR10, HLG, and HDR10+ formats and includes two HDMI 2.1 inputs capable of 4K 120Hz. While great for gamers, it does not support ALLM (Auto Low Latency Mode); instead, users need to manually switch between Fine and Fast image processing modes to optimize input lag.

HDMI 2 also supports eARC, allowing you to send audio (including Dolby Atmos, Dolby TrueHD, DTS Master Audio, and DTS:X) out from the projector if you connect a streaming stick directly to it.

One downside is the absence of dynamic HDR tone mapping. Instead, there is an HDR Dynamic Range slider for manual brightness adjustments of HDR images.

The included remote is somewhat chunky but features a backlit keypad with all necessary buttons for easy control during viewing. Dedicated buttons handle gaming mode toggles (Fine/Fast), lens memory recalls, signal information, lens adjustments, and color modes.

Design & Features Score: 4.5/5

Picture Quality

The LS9000 offers five picture modes—Dynamic, Vivid, Bright Cinema, Cinema, and Natural—consistent across both SDR and HDR content. Each mode produces a watchable image out of the box, though most have a mild blue tint in the grayscale, with Natural being the most color-accurate option.

The default color temperature is set at 6500K, slightly on the cooler side. Adjusting it to 6000K results in a slightly warmer (redder) tone. Users planning professional calibration can assign separate picture modes for SDR and HDR and save settings using the Image Memory feature.

Out of the box, in Natural mode, SDR measurements showed an average Delta E of 2.8, with some grayscale points exceeding 4 due to the blue bias. After calibration, Delta E values can be reduced below 2.1, with many readings under 1.

Color gamut coverage measures 90.25% of UHDA-P3 and 66.86% of the BT.2020 standard.

Brightness measured in Dynamic mode averaged around 2,062 lumens, slightly below the rated 2,200 lumens, partly due to image zoom caused by projector positioning. This brightness is sufficient for viewing with some ambient light, although shadow detail will diminish in such conditions.

The projector truly shines in a dark room environment. Colors appear accurate and inviting, SDR and HDR detail is sharp, and contrast along with shadow detail impresses—especially with the Dynamic Contrast setting at High Speed enabled. Though not as stellar as the LS12000’s contrast, the LS9000 delivers excellent value for its price.

However, HDR performance sometimes requires manual tweaking. Bright highlights can cause clipping, for instance, the sunlit underwater scenes in The Meg where bright sun refracts through ocean water. Adjusting the dynamic range slider from its default setting of 8 up to 10 can reduce clipping and soften overly bright scenes.

Throughout testing, I typically set the dynamic range between 8 and 10 depending on content. For example, during the Battle of Pelennor Fields in Return of the King I kept it at 8, but raised it to 9 during bright day scenes in Mad Max: Fury Road for added depth. While adjustments are subtle and not transformative, they allow personalization, something dynamic tone mapping would have automated.

Gaming Performance

Traditionally, home theater projectors struggle to deliver low enough input lag for gaming. With two HDMI 2.1 ports supporting 4K 120Hz and manual mode switching between Fine and Fast processing, the LS9000 is positioned as a strong gaming projector for casual players.

Using the Fast setting on a 4K 60Hz input, input lag measured approximately 20ms; on Fine mode, lag rises to 44ms. Although the projector lacks ALLM, this input lag is acceptable for most non-competitive gamers. My son enjoyed playing Minecraft without issue, and during reaction-based gameplay in titles like Clair Obscur: Expedition 33, performance remained satisfying.

Competitive first-person shooter gamers may notice a difference compared with top-tier gaming TVs, but for the majority, the Epson LS9000 offers a great big-screen gaming experience.

Picture Quality Score: 4.5/5

Value

The Epson Pro Cinema LS9000 stands out as the most affordable model in Epson’s LS series and ranks among the most budget-conscious premium home theater projectors on the market. By comparison, the JVC DLA-NP5, a lamp-based projector, retails around $6,000, as does the Sony VPL-XW5000ES, released three years ago.

The LS9000 delivers greater brightness than both and offers features neither possesses, such as a high-quality laser light engine, HDMI 2.1 inputs with 4K/120Hz and eARC support, an excellent lens with motorized adjustments and cover, zoom, image memory, and 2,200 lumens of brightness.

However, compromises include the absence of dynamic tone mapping (a feature available in some projectors costing half as much, like the Valerion VisionMaster Pro2), no 3D support, lower brightness compared to the LS11000 and LS12000, and lack of ALLM for gaming.

Despite these, the LS9000 produces a detailed, color-accurate picture that is very engaging in dark viewing environments. The low 20ms input lag and 4K 120Hz support also enhance big-screen gaming enjoyment.

Value Score: 4/5

Should I Buy the Epson Pro Cinema LS9000?

Buy it if:

• You want a feature-rich 4K home theater projector at a more affordable price point.
• You prioritize an easy-to-use projector with motorized lens controls and accurate image quality out of the box.
• You enjoy casual 4K 120Hz gaming on a large screen and can manually toggle image processing modes.
• You plan to watch mostly in a dark or light-controlled room for best performance.

Don’t buy it if:

• You require dynamic HDR tone mapping or 3D support.
• You need ALLM for automatically optimized low-latency gaming.
• You watch mostly in bright rooms and need the highest lumen output available.
• You want “True 4K” projection from native 4K chips rather than pixel-shifting technology.

Also Consider

Other models like the Epson Home Cinema LS11000 and LS12000 offer higher brightness and some additional features at increased prices. If dynamic tone mapping or ALLM is essential, exploring options such as the Valerion VisionMaster Pro2 might be worthwhile.

How I Tested the Epson Pro Cinema LS9000

• Evaluated under various viewing conditions—ambient daylight, ceiling lighting, and dark, light-controlled rooms.
• Measurements and calibrations were done using professional-grade software and hardware.
• Setup included ceiling mounting roughly 11 feet from an Elite Screens CineTension 3 ISF-certified CineWhite screen, with image fitting a 100-inch diagonal display.
• Content sources included streaming apps (Disney+, HBO Max, Hulu) via Apple TV 4K, high-quality movie playback on a Kaleidescape Strato V, 4K Blu-ray discs using an Oppo UDP-203 player, and gaming on an Xbox Series X.
• Objective measurements included: X-rite i1 Pro 3 spectrophotometer, Murideo Seven-G 8K pattern generator, Konica Minolta LS-100 luminance meter, Calman calibration software, and a Leo Bodnar 4K lag tester for input lag.
• Testing conducted by an ISF-certified Level III calibrator with decades of display evaluation experience.

https://www.techradar.com/televisions/projectors/i-tested-the-epson-pro-cinema-ls9000-projector-and-it-has-incredible-performance-and-features-for-the-price